Switch#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname Switch1
Switch1(config)#interface FastEthernet0/1
Switch1(config-if)#switchport mode access
Switch1(config-if)#switchport access vlan 2
Switch1(config-if)#exit
Switch1(config)#interface FastEthernet0/2
Switch1(config-if)#switchport mode access
Switch1(config-if)#switchport access vlan 2
Switch1(config-if)#exit
Switch1(config)#interface FastEthernet0/3
Switch1(config-if)#switchport mode access
Switch1(config-if)#switchport access vlan 3
Switch1(config-if)#exit
Switch1(config)#interface FastEthernet0/4
Switch1(config-if)#switchport mode access
Switch1(config-if)#switchport access vlan 3
Switch1(config-if)#exit
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname Switch1
Switch1(config)#interface FastEthernet0/1
Switch1(config-if)#switchport mode access
Switch1(config-if)#switchport access vlan 2
Switch1(config-if)#exit
Switch1(config)#interface FastEthernet0/2
Switch1(config-if)#switchport mode access
Switch1(config-if)#switchport access vlan 2
Switch1(config-if)#exit
Switch1(config)#interface FastEthernet0/3
Switch1(config-if)#switchport mode access
Switch1(config-if)#switchport access vlan 3
Switch1(config-if)#exit
Switch1(config)#interface FastEthernet0/4
Switch1(config-if)#switchport mode access
Switch1(config-if)#switchport access vlan 3
Switch1(config-if)#exit
验证:
PC1àPC2
C:>ping 192.168.10.3
Pinging 192.168.10.3 with 32 bytes of data:
PC1àPC2
C:>ping 192.168.10.3
Pinging 192.168.10.3 with 32 bytes of data:
Reply from 192.168.10.3: bytes=32 time=60ms TTL=241
Reply from 192.168.10.3: bytes=32 time=60ms TTL=241
Reply from 192.168.10.3: bytes=32 time=60ms TTL=241
Reply from 192.168.10.3: bytes=32 time=60ms TTL=241
Reply from 192.168.10.3: bytes=32 time=60ms TTL=241
Reply from 192.168.10.3: bytes=32 time=60ms TTL=241
Reply from 192.168.10.3: bytes=32 time=60ms TTL=241
Reply from 192.168.10.3: bytes=32 time=60ms TTL=241
Reply from 192.168.10.3: bytes=32 time=60ms TTL=241
Ping statistics for 192.168.10.3: Packets: Sent = 5, Received = 5, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 50ms, Maximum = 60ms, Average = 55ms
Approximate round trip times in milli-seconds:
Minimum = 50ms, Maximum = 60ms, Average = 55ms
PC1àPC3
C:>ping 192.168.10.4
Pinging 192.168.10.4 with 32 bytes of data:
C:>ping 192.168.10.4
Pinging 192.168.10.4 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.10.4:
Packets: Sent = 5, Received = 0, Lost = 5 (100% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Packets: Sent = 5, Received = 0, Lost = 5 (100% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
PC1àPC4
C:>ping 192.168.10.5
Pinging 192.168.10.5 with 32 bytes of data:
C:>ping 192.168.10.5
Pinging 192.168.10.5 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.10.5:
Packets: Sent = 5, Received = 0, Lost = 5 (100% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Packets: Sent = 5, Received = 0, Lost = 5 (100% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms