//////////////CISCO7204/06 NPE-225+I/O-1FE/ I/O-AUX
Enabled 灯亮，Slot0:上插有8M Flash卡，而且能检测到有软件存在.//////////////
System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1) boot
*** Coprocessor Unusable Exception *** ///这里提示协处理器不可用，没有在意////
PC = 0x87ff7840, Cause Reg = 0x2000002c, Status Reg = 0x3040d003
monitor: command "boot" aborted due to exception
/////////// 从NPE上启动BOOT软件，但是没有成功，重新尝试启动///////////
System Bootstrap, Version 12.2(1r) [dchih 1r], RELEASE SOFTWARE (fc1)
Copyright (c) 2001 by cisco Systems, Inc.
C7200 platform with 131072 Kbytes of main memory
*** Emulating mis-aligned load at 0x8000ca6a PC = 0x87ff7800 ... succeeded *** Emulating mis-aligned store at 0x800108fd PC = 0x87ff7808 ... failed, opcode = 0x0 *** Coprocessor Unusable Exception *** PC = 0x87ff7840, Cause Reg = 0x2000002c, Status Reg = 0x3040d003 monitor: command "boot" aborted due to exception Rommon1>dev flash: bootflash slot0: slot1: disk0: disk1: Rommon2>dir bootflash: bootflash:/ 1662343 bootflash: nffca.na Rommon3>dir slot0: slot0:/ 4828273 slot0: nffca12.na Rommon4>boot bootflash: |
重复启动然后回到ROM状态....
Rommon5>boot slot0:
状态依然.......
Rommon6>cpu_card_type
C7206 NPE(225)
可以认出NPE的类型为225。
换了一台路由器问题一样（NPE225）
CISCO7204/06 NPE150+I/O-1FE /I/O-AUX
启动正常.
